Samsung 20060428102249265 s64a p disas 12 493 free download

File name 20060428102249265_s64a_p_disas_12_493.pdf

Disassembly & Reassembly 12. Disassembly & Reassembly 12-1 Overhaul Disassembly & Reassembly 12-1-1 Disassembling the Cabinet Part Name Description Description Photo Back Remove the 12 screws fixing the Back Cover. Cover : RH, +, B, M4, L15, ZPC(BLK), SWRCH18A Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit. Lift the fixing Chassis up at and pull the Back Cabinet to separate it from the unit. Notice: Disassemble the product after disconnecting the power cord and discharge the unit to prevent an electric shock and damage to the product due to static electricity. Power Remove the power cord fixing the Back Cover Cord Samsung Electronics 12-1 Disassembly & Reassembly 12-1-2 Disassembling the CRT and Chassis Part Name Description Description Photo Chassis Separate the Main chassis from the Front Cabinet. Pull the Chassis lifting the fixing clip up. Notice: Pulling the Chassis by force may damage the clip or the connector. Pull the Chassis just until the clip comes off the hole. Pull the chassis while raising the clip fixing the Front Cabinet and the Main PCB. Separate the Speakers, the Side AV Wire, the Front Control from the Feature Box Board. Separate the wire from the Wire fixing holder at . Notice: Since there is a clip to connect the Connector Header in the Wire Connector, pulling it by force may damage the clip or the connector. Press the clip down completely and pull the connector. Separate the D-Coil and power cable from the Front Cabinet and Power Board. To separate the power cord, slide the fixing clip and lift the cable up. Separate the CRT Ass'y from the CRT Separate the TBC wire, GND, VM and Tilt cables from the CRT Ass'y sequentially. 12-2 Samsung Electronics Disassembly & Reassembly Part Name Description Description Photo Chassis Separate the